About Remote Legacy
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5. Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers...
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process.
Remote v3 offers three modes of capability: Control, Monitor and Director.
Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote:
- Start/Stop record functions.
- Focus/exposure reticle placement and locking.
- Dual arc slider manual controls for focus and exposure.
- Pull-to-point focus and exposure pulls.
- Create and load Filmic Pro presets from Filmic Remote.
Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics:
- Video preview: Reference video for use with analytics screens.
- Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video.
- Vectorscope: Displays color saturation, by channel, across the entire image.
- Histograms: RGB composite, Luminance, Zone and RGB channel.
Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely.
You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring.
Create your mobile studio today with Filmic Remote!
Notes:
- The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later.
- Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present).
- Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.
Jul 20, 2023
Version 3.7.11
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
Previous Versions
Here you can find the changelog of Remote Legacy since it was posted on our website on 2016-09-24 11:53:40.
The latest version is 3.7.11 and it was updated on 2024-03-21 22:35:04. See below the changes in each version.
Remote Legacy version 3.7.11
Updated At: 2023-07-20
Changes: Jul 20, 2023
Version 3.7.11
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
Remote Legacy version 3.7.10
Updated At: 2023-07-18
Changes: Jul 18, 2023
Version 3.7.10
Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.
Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy).
Remote Legacy version 3.7.9
Updated At: 2022-11-22
Changes: Nov 22, 2022
Version 3.7.9
v3.7.9 includes minor improvements for a better remote control experience.
Remote Legacy version 3.7.7
Updated At: 2022-08-15
Changes: Aug 15, 2022 Version 3.7.7
V3.7.7 of FiLMiC Remote improves the quality of live preview when paired with FiLMiC Pro on devices running iOS 15.4 and newer, and also adds support for ProRes LogV3+ selection under the Imaging > Tone Panel.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to
[email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
Remote Legacy version 3.7.6
Updated At: 2022-04-22
Changes: Apr 22, 2022 Version 3.7.6
V3.7.6 of FiLMiC Remote improves the quality of live preview when paired with FiLMiC Pro on devices running iOS 15.4 and newer, and also adds support for ProRes LogV3+ selection under the Imaging > Tone Panel.
As always we hope you enjoy this update. If you have any questions you can contact us by writing to
[email protected] — and if you enjoy filming with FiLMiC Remote please leave us a positive review on the App Store.
Remote Legacy version 3.7.5
Updated At: 2021-12-22
Changes: Dec 22, 2021 Version 3.7.5
v3.7.5 is a small maintenance release including bug fixes and performance improvements.
If you have any questions, suggestions, or findings please contact us at
[email protected]
Remote Legacy version 3.7.3
Updated At: 2021-12-02
Changes: Dec 2, 2021 Version 3.7.3
v3.7.3 of FiLMiC Remote resolves the most frequent crasher and is recommended for all filmmakers.
If you have any questions, suggestions or findings please contact us at
[email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
Remote Legacy version 3.7.1
Updated At: 2021-11-25
Changes: Nov 25, 2021 Version 3.7.1
v3.7.1 of FiLMiC Remote includes new functionality for an even better remote capture experience:
— New Functionality
• Added support for our brand new Infrared Film Look pack (optional in-app purchase)
• Added support for ProRes formats under the Settings > Resolution menu (requires iPhone 13 as FiLMiC Pro device).
• Added support for Auto/50Hz/60Hz shutter under the Frame Rate menu.
If you have any questions, suggestions or findings please contact us at
[email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
Remote Legacy version 3.7.0
Updated At: 2021-09-02
Changes: Sep 2, 2021 Version 3.7.0
v3.7 of FiLMiC Remote adds full support for film looks which were made available in FiLMiC Pro 6.16.0.
If you have any questions, suggestions or findings please contact us at
[email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
Remote Legacy version 3.6.0
Updated At: 2021-06-29
Changes: Jun 29, 2021 Version 3.6.0
v3.6.0 of FiLMiC Remote includes new functionality and bug fixes for an even better remote capture experience:
— New Functionality
• Added support for the new ultra-wide selfie camera available on the M1 iPad Pro!
• Added support to select Stereo mics under the Settings > Audio menu.
— Bug Fixes and Performance Improvements
• Fixed a bug in which using the manual arc pull points could cause manual controls to become unresponsive.
• Fixed a bug which could cause the reticle to appear locked when it was unlocked.
• Plenty more under the hood improvements for a better capture experience.
If you have any questions, suggestions or findings please contact us at
[email protected] and if you enjoy shooting with FiLMiC Remote, please consider leaving us a review.
Disclaimer
Official App Store Link
We do not host Remote Legacy on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Remote Legacy is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
